IDENTIFICATION OF THE MATERIAL AND SUPPLIER
-
- Product identifier
Product name: HYPOCLEAN
Synonyms: HYPO CLEAN ● TOTAL AUTOMATIC DISHWASHING LIQUID
-
- Uses and uses advised against
Uses AUTOMATIC DISHWASHING DETERGENT ● DISHWASHING DETERGENT
-
- Details of the supplier of the product
Supplier name: Kitchen & Catering Supplies
Address: 5 /13 Day Rd, Rockingham WA 6168
Telephone: (08) 9592 2700
Email: kit-cat@southwest.com.au
Website: www.kitchenandcateringsupplies.com.au
-
- Emergency telephone numbers
Emergency 0414 586 164
HAZARDS IDENTIFICATION
-
- Classification of the substance or mixture
CLASSIFIED AS HAZARDOUS ACCORDING TO SAFE WORK AUSTRALIA CRITERIA
Physical Hazards
Not classified as a Physical Hazard
Health Hazards
Skin Corrosion/Irritation: Category 1A
Serious Eye Damage / Eye Irritation: Category 1 Contact with acids liberates toxic gas.
Environmental Hazards
Aquatic Toxicity (Acute): Category 3
-
- GHS Label elements
Signal word DANGER Pictograms
Hazard statements
AUH031 H314 H318 H402
Contact with acids liberates toxic gas. Causes severe skin burns and eye damage. Causes serious eye damage.
Harmful to aquatic life.
PRODUCT NAME
HYPOCLEAN
Prevention statements
P260 P264 P273 P280
Response statements
P301 + P330 + P331 P303 + P361 + P353
P304 + P340
P305 + P351 + P338
P310 P321 P363
Storage statements
P405
Disposal statements
P501
Do not breathe dust/fume/gas/mist/vapours/spray. Wash thoroughly after handling.
Avoid release to the environment.
Wear protective gloves/protective clothing/eye protection/face protection.
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Immediately call a POISON CENTRE or doctor/physician. Specific treatment is advised – see first aid instructions.
Wash contaminated clothing before reuse. Store locked up.
Dispose of contents/container in accordance with relevant regulations.
-
- Other hazards
No information provided.
COMPOSITION/ INFORMATION ON INGREDIENTS
-
- Substances / Mixtures
Ingredient | CAS Number | EC Number | Content |
POTASSIUM HYDROXIDE | 1310-58-3 | 215-181-3 | <15% |
SODIUM HYPOCHLORITE | 7681-52-9 | 231-668-3 | <5% |
WATER | 7732-18-5 | 231-791-2 | >60% |
NON HAZARDOUS INGREDIENTS | Not Available | Not Available | Remainder |
FIRST AID MEASURES
-
- Description of first aid measures
Eye
Inhalation Skin
Ingestion
First aid facilities
If in eyes, hold eyelids apart and flush continuously with running water. Continue flushing until advised to stop by a Poisons Information Centre, a doctor, or for at least 15 minutes.
If inhaled, remove from contaminated area. To protect rescuer, use a Full-face Type B (Inorganic and acid gas) respirator or an Air-line respirator (in poorly ventilated areas). Apply artificial respiration if not breathing.
If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. Continue flushing with water until advised to stop by a Poisons Information Centre or a doctor.
For advice, contact a Poisons Information Centre on 13 11 26 (Australia Wide) or a doctor (at once). If swallowed, do not induce vomiting.
Eye wash facilities and safety shower should be available.
-
- Most important symptoms and effects, both acute and delayed
Causes severe skin burns and eye damage.
-
- Immediate medical attention and special treatment needed
Treatment is symptomatic. Ingestion of hypochlorites releases hypochlorous acid which is irritating to the mucous membranes and skin but has low systemic toxicity. Buffer the acid by administering antacids.
FIRE FIGHTING MEASURES
-
- Extinguishing media
Use an extinguishing agent suitable for the surrounding fire.
-
- Special hazards arising from the substance or mixture
Non flammable. May evolve toxic gases (chlorine) when heated to decomposition.
-
- Advice for firefighters
Evacuate area and contact emergency services. Toxic gases may be evolved in a fire situation. Remain upwind and notify those downwind of hazard. Wear full protective equipment including Self Contained Breathing Apparatus (SCBA) when combating fire. Use waterfog to cool intact containers and nearby storage areas.
-
- Hazchem code
2R
2 Fine Water Spray.
R Wear liquid-tight chemical protective clothing and breathing apparatus. Dilute spill and run-off.
ACCIDENTAL RELEASE MEASURES
-
- Personal precautions, protective equipment and emergency procedures
Wear Personal Protective Equipment (PPE) as detailed in section 8 of the SDS. Clear area of all unprotected personnel. Ventilate area where possible. Contact emergency services where appropriate.
-
- Environmental precautions
Prevent product from entering drains and waterways.
-
- Methods of cleaning up
Contain spillage, then cover / absorb spill with non-combustible absorbent material (vermiculite, sand, or similar), collect and place in suitable containers for disposal.
-
- Reference to other sections
See Sections 8 and 13 for exposure controls and disposal.
HANDLING AND STORAGE
-
- Precautions for safe handling
Before use carefully read the product label. Use of safe work practices are recommended to avoid eye or skin contact and inhalation. Observe good personal hygiene, including washing hands before eating. Prohibit eating, drinking and smoking in contaminated areas.
-
- Conditions for safe storage, including any incompatibilities
Store in a cool, dry, well ventilated area, removed from incompatible substances, heat or ignition sources and foodstuffs. Ensure containers are adequately labelled, protected from physical damage, sealed when not in use, vented and stored upright. Check regularly for leaks or spills. Large storage areas should have appropriate ventilation systems.
-
- Specific end uses
No information provided.
EXPOSURE CONTROLS / PERSONAL PROTECTION
-
- Control parameters Exposure standards
Ingredient | Reference | TWA | STEL | ||
ppm | mg/m³ | ppm | mg/m³ | ||
Chlorine (Peak Limitation) | SWA [AUS] | 1 | 3 | — | — |
Potassium hydroxide | SWA [AUS] | — | 2 (Peak) | — | — |
SODIUM HYPOCHLORITE | SWA [AUS] | 1 | 3 | — | — |
Biological limits
No biological limit values have been entered for this product.
-
- Exposure controls Engineering controls
Avoid inhalation. Use in well ventilated areas. Where an inhalation risk exists, mechanical extraction ventilation is recommended. Maintain vapour levels below the recommended exposure standard.
PPE
Eye / Face Wear splash-proof goggles.
Hands Wear PVC or rubber gloves.
Body Wear coveralls. When using large quantities or where heavy contamination is likely, wear a PVC or a rubber apron.
Respiratory Where an inhalation risk exists, wear a Full-face Type B (Inorganic and Acid gas) respirator.
PHYSICAL AND CHEMICAL PROPERTIES
-
- Information on basic physical and chemical properties
Appearance Odour
Flammability Flash point Boiling point Melting point
Evaporation rate pH
Vapour density Relative density Solubility (water) Vapour pressure
Upper explosion limit Lower explosion limit Partition coefficient
Autoignition temperature Decomposition temperature Viscosity
Explosive properties Oxidising properties Odour threshold
-
- Other information
% Volatiles
CLEAR COLOURLESS LIQUID CHLORINE ODOUR
NON FLAMMABLE NOT RELEVANT
100°C (Approximately)
< 0°C
NOT AVAILABLE 14.0
NOT AVAILABLE 1.16
SOLUBLE
18 mm Hg @ 20°C NOT RELEVANT NOT RELEVANT NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE
85 %
STABILITY AND REACTIVITY
-
- Reactivity
Contact with acids may liberate toxic chlorine gas.
-
- Chemical stability
Stable under recommended conditions of storage.
-
- Possibility of hazardous reactions
Polymerization will not occur.
-
- Conditions to avoid
Avoid heat, sparks, open flames and other ignition sources.
-
- Incompatible materials
Incompatible (sometimes violently) with oxidising agents (e.g. peroxides), acids (especially hydrochloric – evolving chlorine gas), organic materials, reducing agents (e.g. sulphites), metallic powders, amines, ammonia and heat sources.
-
- Hazardous decomposition products
May evolve oxides of chlorine when heated to decomposition.
- TOXICOLOGICAL INFORMATION
- Information on toxicological effects
Acute toxicity
Ingestion may result in severe burns of the mouth and throat, as well as a danger of perforation of the oesophagus and the stomach. Contact with acids may liberate toxic chlorine gas.
Information available for the ingredients:
Ingredient | Oral LD50 | Dermal LD50 | Inhalation LC50 |
POTASSIUM HYDROXIDE | 273 to 1230 mg/kg (rat) | — | — |
SODIUM HYPOCHLORITE | 5800 mg/kg (mouse) | — | — |
Skin Eye
Sensitisation Mutagenicity Carcinogenicity Reproductive
STOT – single exposure
STOT – repeated exposure
Aspiration
Causes severe burns. Contact may result in irritation, redness, pain, rash, dermatitis and severe burns.
Causes severe burns. Contact may result in irritation, lacrimation, pain, redness and corneal burns with possible permanent eye damage.
Not classified as causing skin or respiratory sensitisation. Not classified as a mutagen.
Not classified as a carcinogen.
Not classified as a reproductive toxin.
Over exposure may result in mucous membrane irritation of the respiratory tract, coughing and possible burns. High level exposure may result in ulceration of the respiratory tract and breathing difficulties. Over exposure to chlorine vapour may result in lung tissue damage. Do not mix with other chemicals unless advised and specific instructions provided, as toxic and irritating gases may be evolved.
Not classified as causing organ damage from repeated exposure. Adverse effects are generally associated with single exposure.
Not classified as causing aspiration.
ECOLOGICAL INFORMATION
-
- Toxicity
Hypochlorites are extremely toxic to fish; Exposure to 0.5 % over 96 hours resulted in death of trout. Harmful to aquatic life.
-
- Persistence and degradability
Hypochlorites are non-persistent in the environment and there is no accumulation potential as they gradually decompose into a salt and oxygen.
-
- Bioaccumulative potential
Hypochlorites are non-persistent in the environment and there is no accumulation potential as they gradually decompose into a salt and oxygen.
-
- Mobility in soil
May leach to groundwater with resultant toxicity to aquatic organisms.
-
- Other adverse effects
No information provided.
DISPOSAL CONSIDERATIONS
-
- Waste treatment methods
Waste disposal
Legislation
Add to a large volume of reducing solution (eg thiosulphate, metabisulphite, but not carbon, sulphur or strong reducer) and acidify with 3M sulphuric acid. When reduction is complete, add mixture to water and neutralise. Absorb with sand or similar non-combustible material and dispose of to an approved landfill site. Contact the manufacturer/supplier for additional information (if required).
Dispose of in accordance with relevant local legislation.
TRANSPORT INFORMATION
CLASSIFIED AS A DANGEROUS GOOD BY THE CRITERIA OF THE ADG CODE
LAND TRANSPORT (ADG) | SEA TRANSPORT (IMDG / IMO) | AIR TRANSPORT (IATA / ICAO) | |
14.1 UN Number | 1719 | 1719 | 1719 |
14.2 Proper
Shipping Name |
CAUSTIC ALKALI LIQUID, N.O.S. | CAUSTIC ALKALI LIQUID, N.O.S. | CAUSTIC ALKALI LIQUID, N.O.S. |
14.3 Transport hazard class | 8 | 8 | 8 |
14.4 Packing Group | II | II | II |
-
- Environmental hazards
No information provided.
-
- Special precautions for user
Hazchem code GTEPG
EmS
2R
8A1
F-A, S-B
REGULATORY INFORMATION
-
- Safety, health and environmental regulations/legislation specific for the substance or mixture
Poison schedule Classifications
Inventory listings
Classified as a Schedule 6 (S6) Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP).
Safework Australia criteria is based on the Globally Harmonised System (GHS) of Classification and Labelling of Chemicals.
AUSTRALIA: AIIC (Australian Inventory of Industrial Chemicals)
All components are listed on AIIC, or are exempt.
OTHER INFORMATION
Additional information
RESPIRATORS: In general the use of respirators should be limited and engineering controls employed to avoid exposure. If respiratory equipment must be worn ensure correct respirator selection and training is undertaken. Remember that some respirators may be extremely uncomfortable when used for long periods. The use of air powered or air supplied respirators should be considered where prolonged or repeated use is necessary.
EXPOSURE STANDARDS – TIME WEIGHTED AVERAGE (TWA) or WES (WORKPLACE
EXPOSURE STANDARD) (NZ): Exposure standards are established on the premise of an 8 hour work period of normal intensity, under normal climatic conditions and where a 16 hour break between shifts exists to enable the body to eliminate absorbed contaminants. In the following circumstances, exposure standards must be reduced: Strenuous work conditions; hot, humid climates; high altitude conditions; extended shifts (which increase the exposure period and shorten the period of recuperation).
PERSONAL PROTECTIVE EQUIPMENT GUIDELINES:
The recommendation for protective equipment contained within this report is provided as a guide only. Factors such as form of product, method of application, working environment, quantity used, product concentration and the availability of engineering controls should be considered before final selection of personal protective equipment is made.
HEALTH EFFECTS FROM EXPOSURE:
It should be noted that the effects from exposure to this product will depend on several factors including: form of product; frequency and duration of use; quantity used; effectiveness of control measures; protective equipment used and method of application. Given that it is impractical to prepare a report which would encompass all possible scenarios, it is anticipated that users will assess the risks and apply control methods where appropriate.
Abbreviations
ACGIH American Conference of Governmental Industrial Hygienists
CAS # Chemical Abstract Service number – used to uniquely identify chemical compounds CNS Central Nervous System
EC No. EC No – European Community Number
EMS Emergency Schedules (Emergency Procedures for Ships Carrying Dangerous Goods)
GHS Globally Harmonized System
GTEPG Group Text Emergency Procedure Guide
IARC International Agency for Research on Cancer
LC50 Lethal Concentration, 50% / Median Lethal Concentration LD50 Lethal Dose, 50% / Median Lethal Dose
mg/m³ Milligrams per Cubic Metre OEL Occupational Exposure Limit
pH relates to hydrogen ion concentration using a scale of 0 (high acidic) to 14 (highly alkaline).
ppm Parts Per Million
STEL Short-Term Exposure Limit
STOT-RE Specific target organ toxicity (repeated exposure) STOT-SE Specific target organ toxicity (single exposure)
SUSMP Standard for the Uniform Scheduling of Medicines and Poisons SWA Safe Work Australia
TLV Threshold Limit Value
TWA Time Weighted Average
Report status
This document has been compiled by RMT on behalf of the manufacturer, importer or supplier of the product and serves as their Safety Data Sheet (‘SDS’).
It is based on information concerning the product which has been provided to RMT by the manufacturer, importer or supplier or obtained from third party sources and is believed to represent the current state of knowledge as to the appropriate safety and handling precautions for the product at the time of issue. Further clarification regarding any aspect of the product should be obtained directly from the manufacturer, importer or supplier.
While RMT has taken all due care to include accurate and up-to-date information in this SDS, it does not provide any warranty as to accuracy or completeness. As far as lawfully possible, RMT accepts no liability for any loss, injury or damage (including consequential loss) which may be suffered or incurred by any person as a consequence of their reliance on the information contained in this SDS.
Prepared by
Risk Management Technologies 5 Ventnor Ave, West Perth
Western Australia 6005
Phone: +61 8 9322 1711
Fax: +61 8 9322 1794
Email: info@rmt.com.au Web: www.rmtglobal.com
[ End of SDS ]